编译RK3399 uboot 报错解决
本帖最后由 tangh 于 2020-5-5 16:57 编辑harmony@rk-server:~/rk3399buildroot$ ./build.sh all
Dump env:
--------------------
CMD = /home/harmony/rk3399buildroot/device/rockchip/common/build.sh
COMMON_DIR = /home/harmony/rk3399buildroot/device/rockchip/common
TOP_DIR = /home/harmony/rk3399buildroot
BOARD_CONFIG = /home/harmony/rk3399buildroot/device/rockchip/.BoardConfig.mk
SDFUSE_DIR = /home/harmony/rk3399buildroot/friendlyelec/rk3399/sd-fuse_rk3399
BUILD_TARGET = all
NEW_BOARD_CONFIG = /home/harmony/rk3399buildroot/device/rockchip/rk3399/all
============================================
TARGET_ARCH=arm64
TARGET_PLATFORM=rk3399
TARGET_UBOOT_CONFIG=rk3399_defconfig
TARGET_KERNEL_CONFIG=nanopi4_linux_defconfig
TARGET_KERNEL_DTS=rk3399-nanopi4-rev00
TARGET_BUILDROOT_CONFIG=rockchip_rk3399
TARGET_RECOVERY_CONFIG=rockchip_rk3399_recovery
TARGET_PCBA_CONFIG=rockchip_rk3399_pcba
TARGET_RAMBOOT_CONFIG=
============================================
============Start build uboot============
TARGET_UBOOT_CONFIG=rk3399_defconfig
=========================================
toolchain: /home/harmony/rk3399buildroot/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-
#
# configuration written to .config
#
make: *** No rule to make target '/home/harmony/rk3399-buildroot/u-boot/include/common.h', needed by 'include/config/auto.conf'.Stop
问题：原始解压包存在编译的临时文件。
直接执行：./build.sh cleanall即可
或者：cd u-boot/make distclean
页:
[1]